Abstract-In-situ evaluation of porosity in thermal barrier coatings based on the broadening of terahertz time-domain pulses: simulation and experimental investigations

Dongdong Ye, Weize Wang, Haiting Zhou, Jibo Huang, Wenchao Wu, Hanhong Gong, and Zhen Li

Morphologies of the 8YSZ powders. (a) Particle sizes in the range of 15–55 µm; (b) Particle sizes in the range of 40–96 µm.

https://www.osapublishing.org/oe/abstract.cfm?uri=oe-27-20-28150

Porosity is one of the most important indicators for the characterization of the comprehensive performance of thermal barrier coatings (TBCs). Herein, we explored a fast, nondestructive porosity evaluation method based on the terahertz time-domain broadening effect. Different preparation process parameters were used to deposit the ceramic coatings, and the porosity ranged from 9.09% to 21.68%. Monte Carlo simulations were conducted to reveal the transitive relation between porosity and the terahertz time-domain broadening at different extinction coefficients and transmission distances. A transmission mode with an incidence angle of 0° was used to estimate the terahertz dielectric properties of ceramic coatings and the relative broadening ratio of terahertz pulses at different porosities. As a result, the Monte Carlo simulations showed that the time-domain broadening effect was enhanced when the extinction coefficient and transmission distances increased. As the porosity increased, the refractive index decreased and the extinction coefficient increased. The latter was more sensitive to minor porosity changes as demonstrated by linear fitting comparisons. Meanwhile, the relative broadening ratio increased when the porosity increased, and reserved the sensitivity of the extinction coefficient to porosity changes. The effect was more obvious on the relative broadening ratio which experienced multiple transmissions and reflections. Moreover, the relative broadening ratio could be obtained faster and in an easier manner compared to the dielectric parameters in both the transmission and reflection modes, based on single-step tests with the use of actual terahertz wave inspection. Finally, this study proposed a novel, convenient, online, nondestructive, and noncontact porosity evaluation method that could be potentially utilized to evaluate the integrity of TBCs in gas turbine blades.

© 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement