A repository & source of cutting edge news about emerging terahertz technology, it's commercialization & innovations in THz devices, quality & process control, medical diagnostics, security, astronomy, communications, applications in graphene, metamaterials, CMOS, compressive sensing, 3d printing, and the Internet of Nanothings. NOTHING POSTED IS INVESTMENT ADVICE! REPOSTED COPYRIGHT IS FOR EDUCATIONAL USE.
Showing posts with label gyrotron. Show all posts
Showing posts with label gyrotron. Show all posts
Friday, January 24, 2020
Abstract-High power Continuously Frequency-tunable Terahertz Radiation Sources and Transmission Lines for DNP-enhanced NMR System
Diwei Liu, Tao Song, Hao Shen, Jie Huang, Ning Zhang, Chenghai Wang, Wei Wang, Shenggang Liu
https://ieeexplore.ieee.org/document/8510299
The effect of the electron beam quality of a 250GHz continuously frequency-tunable gyrotron used for Dynamic Nuclear Polarization enhanced Nuclear Magnetic Resonance is tuned by changing the operating voltage Vo or the operating magnetic field Bo on the operating frequency and the beam-wave interaction efficiency is investigated. Meanwhile, an improved transmission and mirror system with a well-focused Gaussian-like output beam is designed to match the DNP-NMR sample.
Wednesday, June 12, 2019
Abstract-Powerful continuous-wave sub-terahertz electron maser operating at the 3rd cyclotron harmonic
Yu. K. Kalynov, V. N. Manuilov, A. Sh. Fiks, N. A. Zavodski
https://aip.scitation.org/doi/abs/10.1063/1.5094875
Coherent subterahertz radiation is achieved in an electron cyclotron maser (large-orbit gyrotron configuration) operating at a higher cyclotron harmonic in the continuous-wave generation regime. This auto-oscillator is based on the use of a gun with a magnetic field cusp and a section for adiabatic magnetic compression with a factor of 1000, forming a 30 keV/0.7 A axis-encircling electron beam in a magnetic field of 5 T. A stable single-mode generation is achieved in the case of operation at the third and second cyclotron harmonics at frequencies of 0.394 THz and 0.267 THz with radiation powers of 0.37 kW and 0.9 kW, respectively.
https://aip.scitation.org/doi/abs/10.1063/1.5094875
Coherent subterahertz radiation is achieved in an electron cyclotron maser (large-orbit gyrotron configuration) operating at a higher cyclotron harmonic in the continuous-wave generation regime. This auto-oscillator is based on the use of a gun with a magnetic field cusp and a section for adiabatic magnetic compression with a factor of 1000, forming a 30 keV/0.7 A axis-encircling electron beam in a magnetic field of 5 T. A stable single-mode generation is achieved in the case of operation at the third and second cyclotron harmonics at frequencies of 0.394 THz and 0.267 THz with radiation powers of 0.37 kW and 0.9 kW, respectively.
Friday, March 29, 2019
Abstract-Investigation of high-order mode excitation in a terahertz second-harmonic gyro-BWO
Shi Pan, Chao-Hai Dua), Zi-Chao Gao, Fan-Hong Li, Hui-Qi Bian, Pu-Kun Liu
![]() |
FIG. 1.A quarter of a full sectional view of the cathode-end output circuit in a THz gyro-BWO. |
As to gyrotron oscillators, operation at high harmonics is an effective solution to decrease the required magnetic field strengths and improve radiation frequencies towards the terahertz (THz) band. Unfortunately, significant challenges related to a harmonic gyrotron include weak interaction strengths and serious mode competition conditions. In this paper, we report on the excitation strategy and stable-state property of a THz second-harmonic (SH) gyro-BWO with the TE24,3 mode. Such an extremely high-order mode interaction system is inherently capable of providing high power capacity and advanced mode selectivity. A competition-free parameter space is created by increasing the Doppler sensitivity of one fundamental-harmonic (FH) competing mode at low magnetic fields and simultaneously suppressing the Q factor of another FH competing mode in the near-cutoff region at high magnetic fields. The SH quasi-whispering-gallery mode can be stimulated with a medium output power at around 0.5 THz during the FH mode switching process. This work contributes to further exploiting high frequency steps in the high-order multi-mode frequency-tuning gyro-BWO.
Wednesday, April 18, 2018
Abstract-Frequency pulling in a low-voltage medium-power gyrotron
Li Luo, Chao-Hai Du, Ming-Guang Huang, Pu-Kun Liu,
Many recent biomedical applications use medium-power frequency-tunable terahertz (THz) sources, such as sensitivity-enhanced nuclear magnetic resonance, THz imaging, and biomedical treatment. As a promising candidate, a low-voltage gyrotron can generate watt-level, continuous THz-wave radiation. In particular, the frequency-pulling effect in a gyrotron, namely, the effect of the electron beam parameters on the oscillation frequency, can be used to tune the operating frequency. Most previous investigations used complicated and time-consuming gyrotron nonlinear theory to study the influence of many beam parameters on the interaction performance. While gyrotron linear theory investigation demonstrates the advantages of rapidly and clearly revealing the physical influence of individual key beam parameters on the overall system performance, this paper demonstrates systematically the use of gyrotron linear theory to study the frequency-pulling effect in a low-voltage gyrotron with either a Gaussian or a sinusoidal axial-field profile. Furthermore, simulations of a gyrotron operating in the first axial mode are carried out in the framework of nonlinear theory as a contrast. Close agreement is achieved between the two theories. Besides, some interesting results are obtained. In a low-current sinusoidal-profile cavity, the ranges of frequency variation for different axial modes are isolated from each other, and the frequency tuning bandwidth for each axial mode increases by increasing either the beam voltage or pitch factor. Lowering the voltage, the total tuning ranges are squeezed and become concentrated. However, the isolated frequency regions of each axial mode cannot be linked up unless the beam current is increased, meaning that higher current operation is the key to achieving a wider and continuous tuning frequency range. The results presented in this paper can provide a reference for designing a broadband low-voltage gyrotron.
Tuesday, December 26, 2017
Abstract-Method of Providing the High Cyclotron Harmonic Operation Selectivity in a Gyrotron With a Spatially Developed Operating Mode
Ilya V. Bandurkin, Mikhail Yu Glyavin, Sergey V. Kuzikov, Petr B. Makhalov, Ivan V. Osharin, Andrey V. Savilov
http://ieeexplore.ieee.org/document/8002605/
An electrodynamic method for suppressing low-frequency oscillations at the fundamental cyclotron resonance in a gyrotron at a high cyclotron harmonic is proposed and theoretically investigated. According to simulations, the use of this method in the terahertz gyrotron at the second cyclotron harmonic operating at the spatially developed mode TE63,15 can provide a multiple excess of the starting currents of the parasitic modes over the starting current of the desired oscillations.
Saturday, December 2, 2017
Harnessing the rattling motion of oxygen ions to convert T-rays to visible light
Scientists have shown that terahertz rays can be converted to light visible to the human eye. The finding is a breakthrough for functional materials research and could lead to the development of a new kind of terahertz detector.

Top: A schematic representation of the nanoscale cages. The oxygen anions randomly occupy one sixth of the cages. Bottom: A photograph of the emission of visible light at a terahertz radiation level of 0.21 and output power of 50 W.
Credit: ACS Nano
Scientists have successfully visualized terahertz radiation, popularly known as T-rays, using a crystal called mayenite (Ca12Al14O33). Their method cleverly utilizes the rattling motion caused by the vibration of oxygen ions inside the cage-like structures of the crystal.
In recent years, there has been growing interest in developing practical devices based on terahertz technology. With wavelengths longer than infrared light, T-rays are considered safer than conventional imaging systems. They are already used, for example, at airport security checkpoints, and are starting to be used more widely in areas such as medical screening, food inspection and analysis of artworks. The visualization of terahertz light itself, however, has so far proved challenging.
Now, Hideo Hosono of Materials Research Center for Element Strategy, Tokyo Tech and co-workers in Japan, Ukraine and the US have devised a simple approach to convert T-rays to bright, visible light. Their findings have been published in ACS Nano.
First, the study involved beaming T-rays onto the mayenite crystal using a gyrotron[1]. This led to the vibration of oxygen anions[2], which collide with the inside walls of the cages within the crystal. Each cage has an inner diameter of 0.4 nanometers and an outer diameter of 0.7 nanometers.
"The rattling of oxygen ions within the cages promotes upward energy conversion," Hosono explains. "Strong and frequent collisions of the oxygen ions induce electron transfer to neighboring empty cages. The excitation of the oxygen ions is key to the emission of visible light."
Spectroscopy measurements confirmed that the visible light originated from vibrations caused by the free-moving oxygen anions. The researchers took care to rule out the possibility of other sources such as black body radiation and surface polarization as reasons behind the production of visible light.
The study is an example of strategic research on functional materials under the Element Strategy initiative supported by Japan's Ministry of Education, Culture, Sports, Science and Technology (MEXT) and the Japan Science and Technology Agency (JST).
"The crystal in our study is just composed of calcium, aluminium and oxygen, all of which are in the top five of the most abundant elements," says Hosono. "So, it's one of the most inexpensive materials, at around 15 cents per kilogram."
Despite its simplicity, Hosono says that the crystal has many exciting properties due to its nanostructure. Drawing on 20 years of research, his group has already succeeded in demonstrating that the material has excellent catalytic properties for ammonia synthesis and superconductivity.
Best known for his pioneering work on iron-based superconductors, Hosono says that the current study marks a new research direction. "Our group has been concentrating on the cultivation of new functionalities using abundant elements, but it's the first time for me to focus on ionic motion -- this is completely new," he says.
The findings could lead to the development of a T-ray detector, as no such conventional detector has yet been designed.
Hosono adds: "Right now, our material is good at detecting strong terahertz radiation. The challenge will be how to adjust the sensitivity."
His group has also reported that the oxygen anions can be substituted with gold or hydrogen anions inside the cages. By making use of these different anions, it may be possible to develop detectors that emit different-colored light in future.
Technical terms
[1]Gyrotron: A device capable of generating high-power terahertz radiation. The gyrotron used in this study (called Gyrotron FU CW IV) was developed at the Research Center for Development of Far-Infrared Region, University of Fukui, Japan.
[2]Anions: Negatively charged ions. Together with their positively charged counterparts (cations), they hold together the structure of ionic crystals.
Tuesday, September 26, 2017
Abstract-Broadband amplification of low-terahertz signals using axis-encircling electrons in a helically corrugated interaction region
W. He, C. R. Donaldson, L. Zhang, K. Ronald, A. D. R. Phelps, A. W. Cross,
https://journals.aps.org/prl/accepted/aa075Y48Q3c13a6851270ff5428f8a399615110c3
Experimental results are presented of a broadband, high power, gyrotron traveling wave amplifier (gyro-TWA) operating in the 75-110 GHz frequency band and based on a helically corrugated interaction region (HCIR). The second harmonic cyclotron mode of a 55 keV, 1.2 A, axis-encircling electron beam generated from a cusp electron gun was used to resonantly interact with a traveling TE21-like eigenwave, existing in the HCIR, achieving broadband amplification based on the cyclotron resonance maser instability. The gyro-TWA was measured to generate a maximum power of 3.4 kW with an unsaturated gain of 36-38 dB in the driving frequency band of 91-96.5 GHz.
Tuesday, March 14, 2017
Abstract-Simultaneous Stabilization of Gyrotron Frequency and Power by PID Double Feedback Control on the Acceleration and Anode Voltages
https://link.springer.com/article/10.1007/s10762-017-0374-1
- E. M. KhutoryanEmail author
- T. Idehara
- A. N. Kuleshov
- Y. Tatematsu
- Y. Yamaguchi
- Y. Matsuki
- T. Fujiwara
- In this paper, we present the results of simultaneous stabilization of both the frequency and the output power by a double PID feedback control on the acceleration and anode voltages in the 460-GHz gyrotron FU CW GVI, also known as “Gyrotron FU CW GO-1” (according to the nomenclature adopted at Osaka University). The approach used in the experiments is based on the modulation of the cyclotron frequency and the pitch factor (velocity ratio) of the electron beam by varying the acceleration and the anode voltages, respectively. In a long-term experiment, the frequency and power stabilities were made to be better than ±10−6 and ±1%, respectively.
Friday, January 29, 2016
Abstract-Gyrotron with a sectioned cavity based on excitation of a far-from-cutoff operating mode
A typical problem of weakly relativistic low-power gyrotrons (especially in the case of operation at high cyclotron harmonics) is the use of long cavities ensuring extremely high diffraction Q-factors for the operating near-cutoff waves. As a result, a great share of the rf power radiated by electrons is spent in Ohmic losses. In this paper, we propose to use a sectioned cavity with π-shifts of the wave phase between sections. In such a cavity, a far-from-cutoff axial mode of the operating cavity having a decreased diffraction Q-factor is excited by the electron beam in a gyrotron-like regime.
(This paper is focused basically on the problems of the gyrotrons operating at high cyclotron harmonics in the terahertz frequency range)
Tuesday, December 23, 2014
Abstract-Study on calculation method of terahertz gyrotron with special cross-section cavity
Xuesong Yuan ; Terahertz S&T Res. Center, Univ. of Electron. Sci. & Technol. of China, Chengdu, China ; Yu Han ; Yang Yan
http://ieeexplore.ieee.org/xpl/articleDetails.jsp?reload=true&arnumber=6092205
In order to develop high power terahertz sources, high harmonic terahertz gyrotrons with special cross-section cavity have been proposed. The calculation method of the gyrotrons mentioned above has been investigated based on the three-dimensional electromagnetic simulation software CST and traditional nonlinear theory of gyrotrons in this paper. In this method the analytical solution of the high frequency fields is replaced by inserting the simulation results of CST, the beam-wave interaction efficiency, coupling coefficient and starting current have been obtained. A 0.4THz third harmonic TE33 mode gyrotron with corrugated interaction cavity has been designed by making use of this calculation method.
Tuesday, March 11, 2014
Abstract-Food inspection system using terahertz imaging
- Won-Hui Lee*,
- Wangjoo Lee
Article first published online: 11 MAR 2014
DOI: 10.1002/mop.28303
Copyright © 2014 Wiley Periodicals, Inc.
A terahertz (THz) transmission imaging system using a 0.2 and 0.4 THz gyrotron as a high power source was evaluated. In the gyrotron, 0.2 THz is the first main mode and 0.4 THz is the second harmonic mode. The output power of gyrotron is about 100 W at 0.2 THz and 1 W at 0.4 THz. For fast imaging, the source output was shaped into a line beam and an array detector was used. Two reflecting mirrors were utilized for a reflective imaging system. A 0.8 mm resolution was obtained using a 0.4 THz transmission image. The feasibility of fast THz imaging for the inspection of foreign substances in food is demonstrated. © 2014 Wiley Periodicals, Inc. Microwave Opt Technol Lett 56:1211–1214, 2014
Wednesday, January 15, 2014
Abstact-Development of second harmonic gyrotrons, Gyrotron FU CW GII and Gyrotron FU CW GIII, equipped with internal mode converters
http://link.springer.com/article/10.1007%2Fs10762-014-0048-1#
Second harmonic gyrotrons, Gyrotron FU CW GII and Gyrotron FU CW GIII, were developed at the Research Center for Development of Far-Infrared Region, University of Fukui, Japan to achieve two goals. Each gyrotron was equipped with an internal quasi-optical mode converter. Using Gyrotron FU CW GII allowed the design of the cavity and mode converter to be validated, which was the first goal. After that, Gyrotron FU CW GIII, which is an improved version of Gyrotron FU CW GII, allowed us to achieve a high power output of up to 420 W, which was the second goal, with a cathode voltage setting of −21 kV and a beam current of 0.57 A. This was achieved using a newly developed electron gun and with the careful sitting of the gyrotron on the magnet.
Second harmonic gyrotrons, Gyrotron FU CW GII and Gyrotron FU CW GIII, were developed at the Research Center for Development of Far-Infrared Region, University of Fukui, Japan to achieve two goals. Each gyrotron was equipped with an internal quasi-optical mode converter. Using Gyrotron FU CW GII allowed the design of the cavity and mode converter to be validated, which was the first goal. After that, Gyrotron FU CW GIII, which is an improved version of Gyrotron FU CW GII, allowed us to achieve a high power output of up to 420 W, which was the second goal, with a cathode voltage setting of −21 kV and a beam current of 0.57 A. This was achieved using a newly developed electron gun and with the careful sitting of the gyrotron on the magnet.
Monday, September 30, 2013
Abstract-An Ultrahigh-order-mode, Higher-harmonic Coaxial Gyrotron Oscillator in Sub-terahertz Wave Range
Hui-Bo Zhang, Shi-Chang Zhang
http://link.springer.com/article/10.1007%2Fs10762-013-0026-z
A coaxial cavity gyrotron oscillator at a frequency of 0.34 THz is studied, which operates with a quite low magnetic field of 4.55 Tesla at the third cyclotron harmonic of the ultrahigh-order mode TE43,4. Properly choosing the depth of the longitudinal corrugations on the inner rod and optimizing the electron-beam position significantly suppress the mode competition. Nonlinear multimode simulations show the feasibility of the single-mode operation with an output power of 163 kW by using an electron beam with a voltage of 70kV and a current of 30A, which corresponds to an interaction efficiency of 9.2 % with maxim density of ohmic losses 2.9 kW/cm2.
Wednesday, March 27, 2013
Abstract-High power wideband gyrotron backward wave oscillator operating towards the terahertz region
W. He, C. R. Donaldson, L. Zhang, K. Ronald, P. McElhinney, and A. W. Cross
http://prl.aps.org/accepted/fa07cYcdM9c12133c6286d9809d8d09987fde325b
Experimental results are presented of the first successful gyrotron backward wave oscillator (gyro-BWO) with continuous frequency tuning near the low terahertz region. A helically corrugated interaction region (HCIR) was used to allow efficient interaction over a wide frequency band at the second harmonic of the electron cyclotron frequency without parasitic output. The gyro-BWO generated a maximum output power of 12 kW when driven by a 40 kV, 1.5 A, annular-shaped large-orbit electron beam and achieved a frequency tuning band of 88-102.5 GHz by adjusting the cavity magnetic field. The performance of the gyro-BWO is consistent with 3D particle-in-cell (PIC) numerical simulations
Saturday, March 2, 2013
Temkin named IEEE Plasma Science and Applications Award winner
http://mit.edu/newsoffice/2013/temkin-named-ieee-plasma-science-and-applications-award-recipient.html
Dr. Richard J. Temkin, a senior scientist in the Department of Physics and associate director of the Plasma Science and Fusion Center (PSFC), has been named as the recipient of the 2013 IEEE Plasma Science and Application Award. Temkin, who heads the Waves and Beams Division at the PSFC, was cited "for fundamental contributions to the field of high power gyrotrons and their application."
The IEEE Plasma Science and Applications Award is given annually “to recognize outstanding contributions to the field of Plasma Science in research or new applications.” The prize consists of a plaque, $3,000 cash award and an invitation to present a talk in the award year's International Conference on Plasma Science. The text of that talk will be published as an invited paper in the journal IEEE Transactions on Plasma Science.
Temkin is a pioneer in research and development of high-power and high-frequency gyrotrons. Gyrotrons are a form of electron cyclotron maser in which powerful beams of electrons propagating in vacuum in a high magnetic field radiate coherently at their cyclotron frequency. Very high-frequency output is achieved by using high-field superconducting magnets.
Gyrotrons are the most powerful source of radiation in the millimeter and terahertz frequency range, a range of frequencies that lies between the microwave region and the optical region. Gyrotrons are used for heating plasmas in the program of research on nuclear fusion energy; enhanced nuclear magnetic resonance (NMR) spectroscopy of biomolecules; studies of gas and air breakdown by intense millimeter wave radiation; materials heating and processing; nuclear material detection; cancer detection and cancer therapy; terahertz imaging; high power radars for weather and defense; and food processing and purification.
Temkin will be presented with the award at this year’s IEEE Pulsed Power & Plasma Science Conference, to be held in San Francisco from June 16-21.
Wednesday, September 26, 2012
Development and Applications of High—Frequency Gyrotrons in FIR FU Covering the sub-THz to THz Range
My Note: This interesting piece is taken from Doc Maly's blog "The DNP-NMR Blog"
http://blog.bridge12.com/
Idehara, T. and S. Sabchevski, Development and
Applications of High—Frequency Gyrotrons in FIR FU Covering the sub-THz to THz
Range. J. Infrared Millim. Te., 2012. 33(7): p. 667-694.
Powerful sources of coherent radiation in the sub-terahertz and in the terahertz frequency range of the electromagnetic spectrum are necessary for a great and continuously expanding number of applications in the physical research and in various advanced technological processes as well as in radars, communication systems, for remote sensing and inspection etc .. In recent years, a spectacular progress in the development of various gyro-devices and in particular of the powerful high frequency (sub-terahertz and terahertz) gyrotron oscillators has demonstrated a remarkable potential for bridging the so-called terahertz power gap and stimulated many novel and prospective applications. In this review paper we outline two series of such devices, namely the Gyrotron FU Series which includes pulsed gyrotrons and Gyrotron FU CW Series which consist of tubes operated in a CW (continuous wave) or long pulse mode, both developed at the FIR FU Center. We present the most remarkable achievements of these devices and illustrate their applications by some characteristic examples. An outlook for the further extension of the Gyrotron FU CW Series is also provided.
Subscribe to:
Posts (Atom)