Showing posts with label Zhong Lin Wang. Show all posts
Showing posts with label Zhong Lin Wang. Show all posts

Tuesday, February 28, 2017

OT-Mass Spectrometry Gets a New Power Source and a New Life




Image: Georgia Institute of Technology/Nature Nanotechnology



Mass spectrometry is a chemical analysis and detection tool that has been around for 130 years. In that time there have been so many tweaks and improvements that observers have become a bit blasé about the next big leap in its development.
But the latest improvement out of the Georgia Institute of Technology may be the biggest yet for the venerable old analytical tool. In research described Nature Nanotechnology, the Georgia Tech researchers have managed to make mass spectrometry more sensitive than ever before, more portable, cheaper and even safer. All of these advancements were accomplished by replacing the direct current power source typically used as power source with triboelectric nanogenerators (TENGs). You can see a demonstration of the technology at work in the video below.
While the researchers concede the mechanism by which the enhancement takes place demands more investigation, they believe the unique aspects of the TENG output—oscillating high voltage and controlled current—should enable improvements in the ionization process, increasing the voltage applied without damaging samples.
The so-called TENGs were developed at Georgia Tech back in 2012 and Zhong Lin Wang and his colleagues at Georgia Tech have been improving the technology and expanding its applications ever since. TENGs essentially harvest static electricity from friction. The TENG devices consist of two different materials that are rubbed together. In this way, materials that tend to give off electrons, such as glass or nylon, will donate them to materials that tend to absorb them, such as silicon or teflon. By converting mechanical energy from friction to electricity the TENGs can power small electronic devices.
Applied to mass spectrometry, the TENGs replace the direct current power source for generating the ions. This takes the advantage of a fixed input charge in each cycle of the operation of the TENG regardless of the current or voltage, allowing the mass spectrometer to analyze the smallest possible sample at the highest possible sensitivity.
“The sensitivity has been increased to being able to detect down to 100 molecules,” said Wang in an e-mail interview with IEEE Spectrum. “This is the highest ever.”
Wang also points out how efficient the TENG power source is in using samples. In mass spectrometry, a sample is ionized and the ions are sorted according to their mass-to-charge ratio. But with DC voltages, the number of generated ions does not depend on the applied voltage in a straightforward fashion. As a result, controlling the number of charges used in the ionization of neutral species is usually impossible. The fixed number of charges provided by TENGs offer unprecedented control over ion generation. This makes it very efficient in how it uses the sample.
“The key here is that the total charge delivered in each cycle is entirely controlled and constant regardless of the speed at which the TENG is triggered,” said Wang in a press release.
Facundo Fernández, a professor in Georgia Tech’s School of Chemistry and Biochemistry, added: “Our discovery is basically a new and very controlled way of putting charge onto molecules. We know exactly how much charge we produce using these nanogenerators, allowing us to reach sensitivity levels that are unheard of – at the zeptomole scale (10-21th part of a mole or about 600 molecules). We can measure down to literally hundreds of molecules without tagging.”
The Georgia Tech team has measured the TENGs generating as much as 6000 and 8000 volts as a mass spectrometry ionizer. Standard ionizers normally operate at less than 1500 volts.
“Because the voltage from these nanogenerators is high, we believe that the size of the sample droplets can be much smaller than with the conventional way of making ions,” Fernández said. “That increases the ion generation efficiency. We are operating in a completely different electrospray regime, and it could completely change the way this technology is used.”
By eliminating the often high-voltage power supplies, mass spectrometry could become more portable, leading the researchers to speculate that they could be used in extreme and harsh environments since they would become a durable self-contained unit.
While dramatically improving sensitivity, portability and adding a bit of safety by replacing the high-voltage power supplies, the TENGs also enable the deposition of ions onto surfaces, including non-conducting ones. This becomes possible because the TENGs are creating an oscillating ionization that produces a sequence of alternating positive and negative charges, resulting in a net neutral surface.
Wang added: “This opens a new field for applying TENG in portable and mobile instruments with high performance. The next phase of research is to optimize the performance of the system so that it can be used for sophisticated analytical chemistry and biochemistry.”

Monday, January 6, 2014

Graphene-based nano-antennas may enable networks of tiny machines



http://www.printedelectronicsworld.com/articles/graphene-based-nano-antennas-may-enable-networks-of-tiny-machines-00006126.asp?rsst2id=1&userid=46905&sessionid=1

Graphene-based nano-antennas may enable networks of tiny machines
Networks of nanometer-scale machines offer exciting potential applications in medicine, industry, environmental protection and defense, but until now there's been one very small problem: the limited capability of nanoscale antennas fabricated from traditional metallic components.
 
With antennas made from conventional materials like copper, communication between low-power nanomachines would be virtually impossible. But by taking advantage of the unique electronic properties of the material known as graphene, researchers now believe they're on track to connect devices powered by small amounts of scavenged energy.
 
Based on a honeycomb network of carbon atoms, graphene could generate a type of electronic surface wave that would allow antennas just one micron long and 10 to 100 nanometers wide to do the work of much larger antennas. While operating graphene nano-antennas have yet to be demonstrated, the researchers say their modeling and simulations show that nano-networks using the new approach are feasible with the alternative material.
 
"We are exploiting the peculiar propagation of electrons in graphene to make a very small antenna that can radiate at much lower frequencies than classical metallic antennas of the same size," said Ian Akyildiz, a Ken Byers Chair professor in Telecommunications in the School of Electrical and Computer Engineering at the Georgia Institute of Technology. "We believe that this is just the beginning of a new networking and communications paradigm based on the use of grapheme."
 
Sponsored by the National Science Foundation, the research is scheduled to be reported in the journal IEEE Journal of Selected Areas in Communications (IEEE JSAC). In addition to the nanoscale antennas, the researchers are also working on graphene-based nanoscale transceivers and the transmission protocols that would be necessary for communication between nanomachines.
 
The communications challenge is that at the micron scale, metallic antennas would have to operate at frequencies of hundreds of terahertz. While those frequencies might offer advantages in communication speed, their range would be limited by propagation losses to just a few micrometers. And they'd require lots of power - more power than nanomachines are likely to have.
 
Akyildiz has studied nanonetworks since the late 1990s, and had concluded that traditional electromagnetic communication between these machines might not be possible. But then he and his Ph.D. student, Josep Jornet - who graduated in August 2013 and is now an assistant professor at the State University of New York at Buffalo - began reading about the amazing properties of graphene. They were especially interested in how electrons behave in single-layer sheets of the material.
 
"When electrons in graphene are excited by an incoming electromagnetic wave, for instance, they start moving back and forth," explained Akyildiz."Because of the unique properties of the graphene, this global oscillation of electrical charge results in a confined electromagnetic wave on top of the graphene layer."
 
Known technically as a surface plasmon polariton (SPP) wave, the effect will allow the nano-antennas to operate at the low end of the terahertz frequency range, between 0.1 and 10 terahertz - instead of at 150 terahertz required by traditional copper antennas at nanoscale sizes. For transmitting, the SPP waves can be created by injecting electrons into the dielectric layer beneath the graphene sheet.
 
Materials such as gold, silver and other noble metals also can support the propagation of SPP waves, but only at much higher frequencies than graphene. Conventional materials such as copper don't support the waves.
 
By allowing electromagnetic propagation at lower terahertz frequencies, the SPP waves require less power - putting them within range of what might be feasible for nanomachines operated by energy harvesting technology pioneered by Zhong Lin Wang, a professor in Georgia Tech's School of Materials Science and Engineering.
 
"With this antenna, we can cut the frequency by two orders of magnitude and cut the power needs by four orders of magnitude," said Jornet. "Using this antenna, we believe the energy-harvesting techniques developed by Dr. Wang would give us enough power to create a communications link between nano machines."
 
The nanomachines in the network that Akyildiz and Jornet envision would include several integrated components. In addition to the energy-harvesting nanogenerators, there would be nanoscale sensing, processing and memory, technologies that are under development by other groups. The nanoscale antenna and transceiver work being done at Georgia Tech would allow the devices to communicate the information they sense and process to the outside world.
 
"Each one of these components would have a nanoscale measurement, but in total we would have a machine measuring a few micrometers," said Jornet."There would be lots of tradeoffs in energy use and size."
 
Beyond giving nanomachines the ability to communicate, hundreds or thousands of graphene antenna-transceiver sets might be combined to help full-size cellular phones and Internet-connected laptops communicate faster.
 
"The terahertz band can boost current data rates in wireless networks by more than two orders of magnitude," Akyildiz noted. "The data rates in current cellular systems are up to one gigabit-per-second in LTE advanced networks or 10 gigabits-per-second in the so-called millimeter wave or 60 gigahertz systems. We expect data rates on the order of terabits-per-second in the terahertz band."
 
The unique properties of graphene, Akyildiz says, are critical to this antenna - and other future electronic devices.
 
"Graphene is a very powerful nanomaterial that will dominate our lives in the next half-century," he said. "The European community will be supporting a very large consortium involving many universities and companies with an investment of one billion euros to conduct research into this material."
 
The researchers have so far evaluated numerous nano-antenna designs using modeling and simulation techniques in their laboratory. The next step will be to actually fabricate a graphene nano-antenna and operate it using a transceiver also based on graphene.
 
"Our project shows that the concept of graphene-based nano-antennas is feasible, especially when taking into account very accurate models of electron transport in grapheme," said Akyildiz. "Many challenges remain open, but this is a first step toward creating advanced nanomachines with many applications in the biomedical, environmental, industrial and military fields."
 
The research described here was supported by the National Science Foundation under award number CCF-1349828. Any opinions or conclusions are those of the authors and do not necessarily reflect the official views of the NSF.
 
Source and top image: Georgia Tech
 
For more attend the forthcoming event:

Thursday, December 12, 2013

Graphene-based nano-antennas may enable networks of tiny machines



Schematic shows how surface plasmon polariton (SPP) waves would be formed on the surface of tiny antennas fabricated from graphene. The antennas would be about one micron long and 10 to 11 nanometers wide. Credit: Courtesy Ian Akyildiz and Josep Jornet

 http://phys.org/news/2013-12-graphene-based-nano-antennas-enable-networks-tiny.html#jCp
by John Toon

(Phys.org) —Networks of nanometer-scale machines offer exciting potential applications in medicine, industry, environmental protection and defense, but until now there's been one very small problem: the limited capability of nanoscale antennas fabricated from traditional metallic components.

With antennas made from conventional materials like copper, communication between low-power  would be virtually impossible. But by taking advantage of the unique electronic properties of the material known as graphene, researchers now believe they're on track to connect devices powered by small amounts of scavenged energy.
Based on a honeycomb network of carbon atoms, graphene could generate a type of electronic surface wave that would allow antennas just one micron long and 10 to 11 nanometers wide to do the work of much larger antennas. While operating graphene nano-antennas have yet to be demonstrated, the researchers say their modeling and simulations show that nano-networks using the new approach are feasible with the alternative material.
"We are exploiting the peculiar propagation of electrons in graphene to make a very small antenna that can radiate at much lower frequencies than classical metallic antennas of the same size," said Ian Akyildiz, a Ken Byers Chair professor in Telecommunications in the School of Electrical and Computer Engineering at the Georgia Institute of Technology. "We believe that this is just the beginning of a new networking and communications paradigm based on the use of graphene."
Sponsored by the National Science Foundation, the research is scheduled to be reported in the journal IEEE Journal of Selected Areas in Communications (IEEE JSAC). In addition to the nanoscale antennas, the researchers are also working on graphene-based nanoscale transceivers and the transmission protocols that would be necessary for communication between nanomachines.
The communications challenge is that at the micron scale, metallic antennas would have to operate at frequencies of hundreds of terahertz. While those frequencies might offer advantages in communication speed, their range would be limited by propagation losses to just a few micrometers. And they'd require lots of power – more power than nanomachines are likely to have.
Akyildiz has studied nanonetworks since the late 1990s, and had concluded that traditional electromagnetic communication between these machines might not be possible. But then he and his Ph.D. student, Josep Jornet – who graduated in August 2013 and is now an assistant professor at the State University of New York at Buffalo – began reading about the amazing properties of graphene. They were especially interested in how electrons behave in single-layer sheets of the material.
"When electrons in graphene are excited by an incoming electromagnetic wave, for instance, they start moving back and forth," explained Akyildiz. "Because of the unique properties of the graphene, this global oscillation of electrical charge results in a confined electromagnetic wave on top of the graphene layer."
Known technically as a surface plasmon polariton (SPP) wave, the effect will allow the nano-antennas to operate at the low end of the terahertz frequency range, between 0.1 and 10 terahertz – instead of at 150 terahertz required by traditional copper antennas at nanoscale sizes. For transmitting, the SPP waves can be created by injecting electrons into the dielectric layer beneath the graphene sheet.
Materials such as gold, silver and other noble metals also can support the propagation of SPP waves, but only at much higher frequencies than graphene. Conventional materials such as copper don't support the waves.
By allowing electromagnetic propagation at lower terahertz frequencies, the SPP waves require less power – putting them within range of what might be feasible for nanomachines operated by energy harvesting technology pioneered by Zhong Lin Wang, a professor in Georgia Tech's School of Materials Science and Engineering.
"With this antenna, we can cut the frequency by two orders of magnitude and cut the power needs by four orders of magnitude," said Jornet. "Using this antenna, we believe the energy-harvesting techniques developed by Dr. Wang would give us enough power to create a communications link between nanomachines."
The nanomachines in the network that Akyildiz and Jornet envision would include several integrated components. In addition to the energy-harvesting nanogenerators, there would be nanoscale sensing, processing and memory, technologies that are under development by other groups. The nanoscale antenna and transceiver work being done at Georgia Tech would allow the devices to communicate the information they sense and process to the outside world.
"Each one of these components would have a nanoscale measurement, but in total we would have a machine measuring a few micrometers," said Jornet. "There would be lots of tradeoffs in energy use and size."
Beyond giving nanomachines the ability to communicate, hundreds or thousands of graphene antenna-transceiver sets might be combined to help full-size cellular phones and Internet-connected laptops communicate faster.
"The terahertz band can boost current data rates in wireless networks by more than two orders of magnitude," Akyildiz noted. "The data rates in current cellular systems are up to one gigabit-per-second in LTE advanced networks or 10 gigabits-per-second in the so-called millimeter wave or 60 gigahertz systems. We expect data rates on the order of terabits-per-second in the terahertz band."
The unique properties of graphene, Akyildiz says, are critical to this antenna – and other future electronic devices.
"Graphene is a very powerful nanomaterial that will dominate our lives in the next half-century," he said. "The European community will be supporting a very large consortium involving many universities and companies with an investment of one billion euros to conduct research into this material."
The researchers have so far evaluated numerous nano-antenna designs using modeling and simulation techniques in their laboratory. The next step will be to actually fabricate a graphene nano-antenna and operate it using a transceiver also based on graphene.
"Our project shows that the concept of graphene-based nano-antennas is feasible, especially when taking into account very accurate models of electron transport in ," said Akyildiz. "Many challenges remain open, but this is a first step toward creating advanced nanomachines with many applications in the biomedical, environmental, industrial and military fields."








Sunday, September 8, 2013

Abstract-High-resolution electroluminescent imaging of pressure distribution using a piezoelectric nanowire LED array


  • a, Schematic band diagram of a p-GaN/n-ZnO p–n junction before (black line) and after (red line) applying a compressive strain, where the dip created at the interface is due to the non-mobile, positive ionic charges created by the piezo phototronic effect.

Emulation of the sensation of touch through high-resolution electronic means could become important in future generations of robotics and human–machine interfaces. Here, we demonstrate that a nanowire light-emitting diode-based pressure sensor array can map two-dimensional distributions of strain with an unprecedented spatial resolution of 2.7 µm, corresponding to a pixel density of 6,350 dpi. Each pixel is composed of a single n-ZnO nanowire/p-GaN light-emitting diode, the emission intensity of which depends on the local strain owing to the piezo-phototronic effect. A pressure map can be created by reading out, in parallel, the electroluminescent signal from all of the pixels with a time resolution of 90 ms. The device may represent a major step towards the digital imaging of mechanical signals by optical means, with potential applications in artificial skin, touchpad technology, personalized signatures, bio-imaging and optical microelectromechanical systems.