Showing posts with label plasmonic device. Show all posts
Showing posts with label plasmonic device. Show all posts

Wednesday, September 13, 2017

Abstract-Terahertz slot antenna devices fabricated on silver nanowire network films





We fabricated plasmonic devices operating in the terahertz (THz) frequency range using silver nanowire (AgNW) network films. AgNW films exhibit high conductivity and good transparency in the visible range, with a figure of merit comparable to that of conventional transparent conducting oxide films. The THz conductivity of AgNW films can be improved by post-treatment procedures such as welding using graphene oxide flakes. Using photolithography, we fabricated the slot antenna arrays whose resonance behaviors are determined by geometric parameters such as the length of individual elements. The plasmonic resonance varied with the sheet resistances of the film, enabling us to manipulate the quality factors and the peak position of the resonance, in particular, by controlling the films thickness and by the post-procedures such as the chemical vapor treatment.
© 2017 Optical Society of America

Monday, October 26, 2015

Abstract-The dynamic process and microscopic mechanism of extraordinary terahertz transmission through perforated superconducting films


http://www.nature.com/articles/srep15588

Superconductor is a compelling plasmonic medium at terahertz frequencies owing to its intrinsic low Ohmic loss and good tuning property. However, the microscopic physics of the interaction between terahertz wave and superconducting plasmonic structures is still unknown. In this paper, we conducted experiments of the enhanced terahertz transmission through a series of superconducting NbN subwavelength hole arrays, and employed microscopic hybrid wave model in theoretical analysis of the role of hybrid waves in the enhanced transmission. The theoretical calculation provided a good match of experimental data. In particular, we obtained the following results. When the width of the holes is far below wavelength, the enhanced transmission is mainly caused by localized resonance around individual holes. On the contrary, when the holes are large, hybrid waves scattered by the array of holes dominate the extraordinary transmission. The surface plasmon polaritions are proved to be launched on the surface of superconducting film and the excitation efficiency increases when the temperature approaches critical temperature and the working frequency goes near energy gap frequency. This work will enrich our knowledge on the microscopic physics of extraordinary optical transmission at terahertz frequencies and contribute to developing terahertz plasmonic devices.

Monday, May 11, 2015

Abstract-Observation and explanation of polarization-controlled focusing of terahertz surface plasmon polaritons


Sen Wang, Xinke Wang, Feng Zhao, Shiliang Qu, and Yan Zhang
Phys. Rev. A 91, 053812 – Published 11 May 2015
Polarization-controlled focusing of surface plasmon polaritons (SPPs) is experimentally and theoretically investigated in the terahertz (THz) frequency range. The spiral phase distribution and the phase singularities, which, respectively, lead to the transverse shift of the focal spot for the circularly polarized THz radiation and the split of the focal spot for the linearly polarized THz radiation, are experimentally observed. Furthermore, an alternative theoretical model based on the Huygens-Fresnel principle and Fourier transformation of THz SPPs is proposed to analyze the transverse shift of the focal spot, which provides a simple way to understand the polarization-related SPP phenomena. This research is instructive for the design of polarization-based plasmonic devices.
  • Figure
  • Figure
  • Figure
  • Figure
  • Figure

Wednesday, April 15, 2015

Abstract-High-order localized spoof surface plasmon resonances and experimental verifications


http://www.nature.com/srep/2015/150410/srep09590/full/srep09590.html



We theoretically demonstrated and experimentally verified high-order radial spoof localized surface plasmon resonances supported by textured metal particles. Through an effective medium theory and exact numerical simulations, we show the emergence of these geometrically-originated electromagnetic modes at microwave frequencies. The occurrence of high-order radial spoof plasmon resonances is experimentally verified in ultrathin disks. Their spectral and near-field properties are characterized experimentally, showing an excellent agreement with theoretical predictions. Our findings shed light into the nature of spoof localized surface plasmons, and open the way to the design of broadband plasmonic devices able to operate at very different frequency regimes.

Wednesday, October 22, 2014

Quantum effects in nanometer-scale metallic structures



An electron nanoprobe (yellow) placed near the functionalized silver nanoparticles measured plasmon-assisted quantum tunneling at terahertz frequencies. Credit: Shu Fen Tan, National University of Singapore

 http://phys.org/news/2014-10-quantum-effects-nanometer-scale-metallic.html#jCp

Plasmonic devices combine the 'super speed' of optics with the 'super small' of microelectronics. These devices exhibit quantum effects and show promise as possible ultrafast circuit elements, but current material processing limits this potential. Now, a team of Singapore-based researchers has used a new physical process, known as quantum plasmonic tunneling, to demonstrate the possibility of practical quantum plasmonic devices.

Tunneling is an intriguing aspect of  whereby a particle is able to pass through a classically insurmountable barrier. Theoretically, quantum plasmonic tunneling is only noticeable when plasmonic components are very closely spaced—within half a nanometer or less. However, researchers from the A*STAR Institute of Materials Research and Engineering, the A*STAR Institute of High Performance Computing and the National University of Singapore were able to observe  between materials spaced more than one nanometer apart.

They investigated the tunneling of electrons across a gap between two nanoscale cubes of silver coated with a monolayer of molecules. High-resolution transmission electron microscopy showed that these nanocubes self-assembled into pairs. The separation, and hence the tunneling distance, between the nanoparticles could be controlled by the choice of surface molecule—between 0.5 and 1.3 nanometers in the cases tested.
The monolayer of molecules had an another function—to provide molecular electronic control over the frequency of the oscillating tunnel current, which could be tuned between 140 and 245 terahertz (1 terahertz = 1012 hertz), as was shown by monochromated electron energy-loss spectroscopy.
Theoretical predictions, supported by experimental results, confirmed the nature of the plasmon-assisted tunnel currents between the silver cubes. "We show that it is possible to shine light onto a small system of two closely spaced silver cubes (see image) and generate a tunnel current that oscillates very rapidly between these silver electrodes," explains A*STAR researcher Michel Bosman. "The oscillation is several orders of magnitude faster than typical clock speeds in microprocessors, which currently operate in the gigahertz (= 109 hertz) regime." At the same time, the results also demonstrate the possibility of terahertz molecular electronics.
Two factors contributed to the success of the experiments. First, the nanocubes had atomically flat surfaces, maximizing the tunneling surface area between the two nanoparticles. Second, the molecule-filled gap increased the rate of , making it possible to measure plasmon-assisted .
"We will now use different molecules in the tunnel gap to find out how far the tunnel currents can be carried, and in what range we can tune the oscillation frequency," says Bosman.
More information: Tan, S. F., Wu, L., Yang, J. K. W., Bai, P., Bosman, M. & Nijhuis, C. A." Quantum plasmon resonances controlled by molecular tunnel junctions." Science 343, 1496–1499 (2014). dx.doi.org/10.1126/science.1248797