Abstract-Metasurfaces: Terahertz Broadband Low-Reflection Metasurface by Controlling Phase Distributions

                             

1. Di Sha Dong¹, 
2. Jing Yang², 
3. Qiang Cheng^1,*, 
4. Jie Zhao¹, 
5. Li Hua Gao¹, 
6. Shao Jie Ma³, 
7. Shuo Liu¹, 
8. Hai Bin Chen¹, 
9. Qiong He³,
10. Wei Wei Liu², 
11. Zheyu Fang⁴, 
12. Lei Zhou³and
13. Tie Jun Cui^1,*

Article first published online: 20 OCT 2015

DOI: 10.1002/adom.201570065

© 2015 WILEY-VCH Verlag GmbH & Co. KGaA

http://onlinelibrary.wiley.com/doi/10.1002/adom.201570065/abstract

A single-layered metasurface is proposed by Q. Cheng, T. J. Cui, and co-workers to realize broadband diffusion at terahertz frequencies based on the destructive interference from a number of sub-wavelength elements. On page 1405, two kinds of elements are used to achieve full phase range and a linear phase response. The scattered waves can be efficiently manipulated to disperse into nearly all directions, resulting in extremely low back-scattering. The metasurface shows excellent angular independence toward incident waves across a broad spectrum.

Abstract-Terahertz Broadband Low-Reflection Metasurface by Controlling Phase Distributions

1. Di Sha Dong¹, 
2. Jing Yang², 
3. Qiang Cheng^1,*, 
4. Jie Zhao¹, 
5. Li Hua Gao¹, 
6. Shao Jie Ma³, 
7. Shuo Liu¹, 
8. Hai Bin Chen¹, 
9. Qiong He³,
10. Wei Wei Liu², 
11. Zheyu Fang⁴, 
12. Lei Zhou³and
13. Tie Jun Cui^1,*
14. Article first published online: 5 JUN 2015

DOI: 10.1002/adom.201500156

© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

http://onlinelibrary.wiley.com/doi/10.1002/adom.201500156/abstract

Recently, reflectionless or low-reflection surfaces made of subwavelength structures have been of broad interest in practical engineering. Here, a single-layer terahertz metasurface is proposed to produce ultralow reflections across a broad-frequency spectrum and wide incidence angles by controlling the reflection phases of subwavelength structures. To enable full control of the phase range in a continuous band, a combination of two different subwavelength elements are employed, both of which exhibit weak interactions with the incident terahertz waves, thereby showing high local reflectivities near the operating frequency. An optimization method is utilized to determine the array pattern with the minimum overall reflections under the illumination of plane waves. Both numerical simulations and experimental results demonstrate ultralow reflections of terahertz waves by the metasurface over a broad frequency band and wide incidence angles. By using the proposed metasurface, the far-field scattering patterns of metallic objects can be efficiently controlled, which opens up a new route for low-reflection surface designs in the terahertz spectrum.