Showing posts with label Nathan Jukam. Show all posts
Showing posts with label Nathan Jukam. Show all posts

Monday, September 18, 2017

Abstract-Two-dimensional coherent spectroscopy of a THz quantum cascade laser: observation of multiple harmonics




Sergej Markmann, Hanond Nong, Shovon Pal, Tobias Fobbe, Negar Hekmat, Reshma A. Mohandas, Paul Dean, Lianhe Li, Edmund Linfield, A. G. Davies, Andreas D. Wieck, Nathan Jukam,

https://www.osapublishing.org/oe/abstract.cfm?uri=oe-25-18-21753&origin=search

Two-dimensional spectroscopy is performed on a terahertz (THz) frequency quantum cascade laser (QCL) with two broadband THz pulses. Gain switching is used to amplify the first THz pulse and the second THz pulse is used to probe the system. Fourier transforms are taken with respect to the delay time between the two THz pulses and the sampling time of the THz probe pulse. The two-dimensional spectrum consists of three peaks at (ωτ = 0, ωt = ω0), (ωτ = ω0, ωt = ω0), and (ωτ = 2ω0, ωt = ω0) where ω0 denotes the lasing frequency. The peak at ωτ = 0 represents the response of the probe to the zero-frequency (rectified) component of the instantaneous intensity and can be used to measure the gain recovery.
© 2017 Optical Society of America

Saturday, September 17, 2016

Abstract-Broadband terahertz dispersion control in hybrid waveguides



Tobias Fobbe, Sergej Markmann, Felix Fobbe, Negar Hekmat, Hanond Nong, Shovon Pal, Patrick Balzerwoski, Janne Savolainen, Martina Havenith, Andreas D. Wieck, and Nathan Jukam
https://www.osapublishing.org/oe/fulltext.cfm?uri=oe-24-19-22319

Dispersion control is a key objective in the field of photonics and spectroscopy, since it enhances non-linear effects by both enabling phase matching and offering slow light generation. In addition, it is essential for frequency comb generation, which requires a phase-lock mechanism that is provided by broadband compensation of group velocity dispersion (GVD). At optical frequencies, there are several well-established concepts for dispersion control such as prism or grating pairs. However, terahertz dispersion control is still a challenge, thus hindering further progress in the field of terahertz science and technology. In this work, we present a hybrid waveguide with both broadband, tuneable positive and more than octave-spanning negative terahertz GVD on the order of 10−22 s2/m, which is suitable for either intra- or extra cavity operation. This new terahertz device will enable ultra-short pulse compression, allow soliton propagation, improve frequency comb operation and foster the development of novel non-linear applications.

Tuesday, December 1, 2015

New access to the interior of electronic components




http://www.spacedaily.com/reports/New_access_to_the_interior_of_electronic_components_999.html

An interdisciplinary team at the Ruhr-Universitat Bochum has found a way of accessing the interior of transistors. The researchers have manipulated the electron gas contained within by applying resonators to generate rhythmic oscillation in the terahertz range inside. They shared their findings in the journal Scientific Reports.

Used for switching and amplifying, transistors are fundamental elements of modern electronics. By applying a specific voltage externally to a transistor, an electric current is controlled inside, which, in turn, generates a new voltage.
Compared with the externally applied voltage, the new voltage may be amplified, may oscillate or be logically connected to it. In order to interact with their surroundings via electric current and voltage, transistors contain ultra-thin electron layers, so-called 2D electron gases. The RUB team demonstrated that these gases can be controlled not only via DC and radio-frequency voltages.

"A 2D electron gas is like jelly," explains Prof Dr Andreas Wieck from the Chair for Applied Solid State Physics. "If pressure is electrically applied to the gas from above with a characteristic frequency, thickness and density oscillations are generated."

Accordingly, the gas can be manipulated via electric forces, which oscillates much more rapidly than any radio or microwave frequency. As it has a thickness of just about ten nanometres, the oscillations follow the laws of quantum mechanics. This means: all occurring oscillations have a specific frequency, namely in the terahertz range, i.e. in the range of 1012 Hertz.

"Pressure to the electron gas must be applied in that rapid change," elaborates Wieck. Andreas Wieck, Dr Shovon Pal, Dr Nathan Jukam and other colleagues from the workgroup Terahertz Spectroscopy and Technology as well as from the Chair of Electronic Materials and Nanoelectronics have found a way to trigger the required oscillations. Thus, a new method of accessing the interior of a transistor has been created.

One hundred nanometres above the electron gas, the RUB researchers evaporated an array of identical metallic resonators which can oscillate with the required fixed frequency.

The electron gas was embedded in a semiconductor and could be modified via external DC voltage, namely it could be made a bit thicker or thinner. The thickness determines the frequency which makes the gas oscillate optimally.
Deploying external voltage, the researchers were able to fine-tune the electron gas to the resonators, i.e. adjust the gas so that the alternating electric pressure of the resonators excites it optimally to oscillate in the terahertz range.
This method could be of interest for sensors in chemical and environmental applications, as the researchers suggest. This is because molecule oscillations typically happen in the terahertz range. With modified transistors, such oscillations can be recorded and sensors can be developed that react to the frequencies of certain gases or liquids.

Pal et al. (2015): Ultrawide electrical tuning of light matter interaction in a high electron mobility transistor structure, Scientific Reports, DOI: 10.1038/srep16812

Monday, November 23, 2015

Manipulating transistors at terahertz frequencies



http://phys.org/news/2015-11-transistors-terahertz-frequencies.html#jCp

An interdisciplinary team at the Ruhr-Universität Bochum has found a way of accessing the interior of transistors. The researchers have manipulated the electron gas contained within by applying resonators to generate rhythmic oscillation in the terahertz range inside. They shared their findings in the magazine Scientific Reports.


Transistors can be manipulated not only with voltages
Used for switching and amplifying, transistors are fundamental elements of modern electronics. By applying a specific  externally to a transistor, an electric current is controlled inside, which, in turn, generates a new voltage. Compared with the externally applied voltage, the new voltage may be amplified, may oscillate or be logically connected to it. In order to interact with their surroundings via electric current and voltage, transistors contain ultra-thin electron layers, so-called 2D electron gases. The RUB team demonstrated that these gases can be controlled not only via DC and radio-frequency voltages.
Electron gas can be oscillated like jelly
"A 2D electron gas is like jelly," explains Prof Dr Andreas Wieck from the Chair for Applied Solid State Physics. "If pressure is electrically applied to the gas from above with a characteristic frequency, thickness and density oscillations are generated." Accordingly, the gas can be manipulated via electric forces, which oscillates much more rapidly than any radio or microwave frequency. As it has a thickness of just about ten nanometres, the oscillations follow the laws of quantum mechanics. This means: all occurring oscillations have a specific frequency, namely in the terahertz range, i.e. in the range of 1012 Hertz. "Pressure to the electron gas must be applied in that rapid change," elaborates Wieck. Andreas Wieck, Dr Shovon Pal, Dr Nathan Jukam and other colleagues from the workgroup Terahertz Spectroscopy and Technology as well as from the Chair of Electronic Materials and Nanoelectronics have found a way to trigger the required oscillations. Thus, a new method of accessing the interior of a transistor has been created.
Resonators generate thickness oscillations
One hundred nanometres above the electron gas, the RUB researchers evaporated an array of identical metallic resonators which can oscillate with the required fixed frequency. The electron gas was embedded in a semiconductor and could be modified via external DC voltage, namely it could be made a bit thicker or thinner. The thickness determines the frequency which makes the gas oscillate optimally. Deploying external voltage, the researchers were able to fine-tune the  to the resonators, i.e. adjust the gas so that the alternating electric pressure of the resonators excites it optimally to oscillate in the terahertz range.
Sensors for chemical and environmental technology
This method could be of interest for sensors in chemical and environmental applications, as the researchers suggest. This is because molecule oscillations typically happen in the terahertz range. With modified transistors, such  can be recorded and sensors can be developed that react to the frequencies of certain gases or liquids.
More information: Shovon Pal et al. Ultrawide electrical tuning of light matter interaction in a high electron mobility transistor structure, Scientific Reports (2015). DOI: 10.1038/srep16812


Friday, November 9, 2012

Abstract-Direct intensity sampling of a modelocked terahertz quantum cascade laser


http://apl.aip.org/resource/1/applab/v101/i18/p181115_s1?bypassSSO=1

Joshua R. Freeman1Jean Maysonnave1Nathan Jukam2Pierrick Cavalié1Kenneth Maussang1Harvey E. Beere3David A. Ritchie3Juliette Mangeney1Sukhdeep S. Dhillon1, and Jérôme Tignon1
1Laboratoire Pierre Aigrain, Ecole Normale Supérieure, CNRS (UMR 8551), Université P. et M. Curie, Université D. Diderot, 75231 Paris Cedex 05, France
2Lehrstuhl für Angewandte Festkörperphysik, Ruhr-Universität Bochum, NABF 03/249a, Universitätsstrasse 150, 44780 Bochum, Germany
3Semiconductor Physics, Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, United Kingdom 


Pulses from an actively modelocked terahertz quantum cascade laser are fully characterized using an optical sampling technique to detect the total instantaneous terahertz intensity. By triggering the quantum cascade laser electronics with a femtosecond laser, we are able to measure both the formation of modelocked pulses and the quasi-steady state. The dependence of the pulse width on the modulation power and drive current are investigated. At low drive currents, we measure transform-limited gaussian-shaped pulses with a FWHM of 19 ps