Abstract-Plasmonic terahertz emitters with high-aspect ratio metal gratings

D. V. Lavrukhin, A. E. Yachmenev, I. A. Glinskiy, R. A. Khabibullin, M. Ryzhii, T. Otsuji, M. Shur, K. I. Zaytsev, D. S. Ponomarev

https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11022/1102203/Plasmonic-terahertz-emitters-with-high-aspect-ratio-metal-gratings/10.1117/12.2521290.short

We propose a novel technology for fabricating plasmonic photoconductive antennas (PCAs) based on superlattice (SL) with increased height of the plasmonic gratings up to 100 nm. We passivate the surface of the SL by Si₃N₄, etch there windows and deposit Ti/Au antenna metallization. The plasmonic gratings are formed by electron-beam lithography with Ti/Au metallization followed by lift-off. Then an Al₂O₃ anti-reflection coating layer for reduction of the Fresnel reflection losses is used on the top of the plasmonic gratings, which also serves for maintaining its mechanical stability and providing the excitation of guided modes at the resonant wavelengths of the subwavelength slab waveguide formed by the metal gratings. Current-voltage measurements under femtosecond laser illumination reveal strong increase of the transient photocurrent generated by the fabricated plasmonic PCA which is 15 times higher than for conventional one (i.e. without the plasmonic gratings). The obtained terahertz (THz) power spectra demonstrate 100-times increase of the THz power in the plasmonic PCA. The results might be of interest to the needs of THz spectroscopy and imaging systems, in particular, operating with low-power lasers.

© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.