Showing posts with label Xiaodong Yang. Show all posts
Showing posts with label Xiaodong Yang. Show all posts

Saturday, December 7, 2019

Chapter Abstract-Terahertz (THz) application in food contamination detection



 Aifeng Ren,  Adnan ZahidXiaodong YangAkram Alomainy,  Muhammad Ali ImranQammer H. Abbasi

https://digital-library.theiet.org/content/books/10.1049/sbew542e_ch5

This chapter mainly focuses on various sensing technologies that have been employed to detect food and water contamination. It has been found that these conventional sensing technologies appear to be unfeasible and impractical to meet with the challenging growth of population. In this aspect, THz sensing is discussed in detail and deemed to be more effective due to its strong penetration feature, high resolution, and sensitivity to monitor the molecular changes in fruits. This chapter also introduces a novel technique of fruits contamination detection by monitoring MC and observe the transmission and path loss response of fruits. It also investigates an important parameter such as the absorption coefficient and shows some significant results and correlation of MC with transmission response and absorption coefficient. Upon close analysis, these results give meaningful information about the composites present in fruits such as carbohydrates and proteins. Toward the end, this chapter emphasizes on the advancement and development of terahertz technology applications and found that the THz sensing is a promising candidate and has a potential to change a paradigm in the plant science sector.

Tuesday, February 12, 2019

Abstract-State-of-the-Art in Terahertz Sensing for Food and Water Security – A Comprehensive Review


Aifeng RenAdnan ZahidDou FanXiaodong YangMuhammad AliImranAkram AlomainyQammer H.Abbasi
Fig. 1. Typical terahertz configuration

https://www.sciencedirect.com/science/article/abs/pii/S0924224418308768

Background

Recently, there has been a dramatic change in the field of terahertz (THz) technology. The recent advancements in the THz radiation sector considering generation, manipulation and detection have brought revolution in this field, which enable the integration of THz sensing systems into real-world. The THz technology presents detection techniques and various issues, while providing significant opportunities for sensing food and water contamination detection.

Scope and Approach

Many researchers around the world have exploited the potential of invaluable new applications of THz sensing ranging from surveillance, healthcare and recently for food and water contamination detection. The microbial pollution in water and food is one the crucial issues with regard to the sanitary state for drinking water and daily consumption of food. To address this risk, the detection of microbial contamination is of utmost importance, since the consumption of insanitary or unhygienic food can lead to catastrophic illness.

Key Findings and Conclusions

This paper presents a first-time review of the open literature covering the advances in the THz sensing for microbiological contamination of food and water, in addition to state-of-the-art in network architectures, applications and recent industrial developments. With unique superiority, the THz non-destructive detection technology in food inspection and water contamination detection is emerging as a new area of study. With the great progress, some important challenges and future research directions are presented within the field.

Sunday, May 20, 2018

Abstract -On Chip Antenna Measurement: A Survey of Challenges and Recent Trends


M. Rashid Karim,  Xiaodong Yang, Muhammad Farhan Shafique

https://ieeexplore.ieee.org/document/8328817/

Exponential increase in the requirements of cost effective and highly compact wireless modules has put system-on-chip (SoC) technology in high demand. On-chip-antenna (OCA) is an integral component of SoC-based wireless communication systems and has emerged as a perfect candidate for plethora of promising applications, especially at millimeter wave and terahertz frequencies. OCAs also support compact and low power applications of wireless sensor networks and Internet-of-Things. Since OCAs are manufactured on a single substrate along with other components, therefore their successful realization is subject to several challenges; the most significant of which is their accurate measurement. OCA's precise characterization is considered to be one of the toughest challenges to overcome since traditional off-chip antenna measurement setups are not suitable for this job. This calls for innovative measurement techniques, setups and solutions to enable their true characterization. Inspired by the significance of OCA characterization, this paper presents a comprehensive survey of the key recent developments in the field of OCA measurements. The techniques used to measure conventional off-chip antennas are briefly outlined followed by a succinct description of OCA's characterization challenges. The most recent trends and techniques of OCA measurement are expansively compiled. Some avenues for future trends in this regards are also delineated. It is anticipated that the presentation of this review will inspire the research community to come up with the novel methods and proposals to facilitate the OCA characterization process.https://ieeexplore.ieee.org/document/8328817/

Wednesday, February 5, 2014

Abstract-Metamaterial thermal emitters based on nanowire cavities for high-efficiency thermophotovoltaics


Huixu Deng, Tianchen Wang, Jie Gao and Xiaodong Yang

yangxia@mst.edu
Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology, Rolla, MO 65409, USA
 
Huixu Deng et al 2014 J. Opt. 16 035102. doi:10.1088/2040-8978/16/3/035102
Received 16 September 2013, accepted for publication 2 January 2014, in final form 22 December 2013. Published 3 February 2014.
© 2014 IOP Publishing Ltd

Metamaterial thermal emitters based on gold nanowire cavities on a gold substrate are designed to achieve a narrowband emission spectrum with the emission peak located slightly above the bandgap of photovoltaic (PV) cells, in order to improve the overall efficiency of thermophotovoltaic (TPV) systems. The metamaterial emitter made of gold nanowires embedded in an alumina host exhibits an effective permittivity with extreme anisotropy, which supports cavity resonant modes of both electric dipole and magnetic dipole. The impedance match between the cavity modes and free space leads to strong thermal emission with the desired frequency range slightly above the bandgap of PV cells. Simulation results show that the designed metamaterial emitters are polarization-insensitive and have nearly omnidirectional emission angles. Moreover, theoretical analysis predicts that the overall efficiency of the TPV system can reach Shockley–Queisser limit at a low emitter temperature of Te = 940 K.

Monday, April 29, 2013

Researchers Design Nanometer-Scale Material That Can Speed Up, Squeeze Light

The cross-section of a 100-nanometer-long “meta-atom” of gold and silicon oxide. Researchers say the meta-atom is capable of straightening and speeding up light waves. (Credit: Image courtesy of Missouri University of Science and Technology)
http://www.sciencedaily.com/releases/2013/04/130429094646.htm

Apr. 29, 2013 — In a process one researcher compares to squeezing an elephant through a pinhole, researchers at Missouri University of Science and Technology have designed a way to engineer atoms capable of funneling light through ultra-small channels.

Their research is the latest in a series of recent findings related to how light and matter interact at the atomic scale, and it is the first to demonstrate that the material -- a specially designed "meta-atom" of gold and silicon oxide -- can transmit light through a wide bandwidth and at a speed approaching infinity. The meta-atoms' broadband capability could lead to advances in optical devices, which currently rely on a single frequency to transmit light, the researchers say.
"These meta-atoms can be integrated as building blocks for unconventional optical components with exotic electromagnetic properties over a wide frequency range," write Dr. Jie Gao and Dr. Xiaodong Yang, assistant professors of mechanical engineering at Missouri S&T, and Dr. Lei Sun, a visiting scholar at the university. The researchers describe their atomic-scale design in the latest issue of the journal Physical Review B.
The researchers created mathematical models of the meta-atom, a material 100 nanometers wide and 25 nanometers tall that combined gold and silicon oxide in stairstep fashion. A nanometer is one billionth of a meter and visible only with the aid of a high-power electron microscope.
In their simulations, the researchers stacked 10 of the meta-atoms, then shot light through them at various frequencies. They found that when light encountered the material in a range between 540 terahertz and 590 terahertz, it "stretched" into a nearly straight line and achieved an "effective permittivity" known as epsilon-near-zero.
Effective permittivity refers to the ratio of light's speed through air to its speed as it passes through a material. When light travels through glass, for instance, its effective permittivity is 2.25. Through air or the vacuum of outer space, the ratio is one. That ratio is what is typically referred to as the speed of light.
As light passes through the engineered meta-atoms described by Gao and Yang, however, its effective permittivity reaches a near-zero ratio. In other words, through the medium of these specially designed materials, light actually travels faster than the speed of light. It travels "infinitely fast" through this medium, Yang says.
The meta-atoms also stretch the light. Other materials, such as glass, typically compress optical waves, causing diffraction.
This stretching phenomenon means that "waves of light could tunnel through very small holes," Yang says. "It is like squeezing an elephant through an ultra-small channel."
The wavelength of light encountering a single meta-atom is 500 nanometers from peak to peak, or five times the length of Gao and Yang's specially designed meta-atoms, which are 100 nanometers in length. While the Missouri S&T team has yet to fabricate actual meta-atoms, they say their research shows that the materials could be built and used for optical communications, image processing, energy redirecting and other emerging fields, such as adaptive optics.
Last year, Albert Polman at the FOM Institute for Atomic and Molecular Physics in Amsterdam and Nader Engheta, an electrical engineer at the University of Pennsylvania, developed a tiny waveguide device in which light waves of a single wavelength also achieved epsilon-near-zero. But the Missouri S&T researchers' work is the first to demonstrate epsilon-near-zero in a broadband of 50 terahertz.
"The design is practical and realistic, with the potential to fabricate actual meta-atoms," says Gao. Adds Yang: "With this research, we filled the gap from the theoretical to the practical."
Through a process known as electron-beam deposition, the researchers have built a thin-film wafer from 13 stacked meta-atoms. But those materials were uniform in composition rather than arranged in the stairstep fashion of their modeled meta-atoms.